Incubator sterilizer

This product is a non-antibiotic antibacterial agent, which is specially designed for the pollution control of the water tray of the cell incubator, inhibiting the growth of mycoplasma, bacteria and fungi in the water tray of the incubator, and has a strong removal and inhibition effect on stubborn fungi. It can replace the traditional copper sulfate and other antibacterial agents that are easy to corrode the water tray of the incubator,

usage method:

1. Clean the inner wall of the water tray of the incubator, and it is recommended to use 75% alcohol or cell room disinfectant to clean it.

2. Add 1:1000 to the water pan (autoclave water). Recommended dosage: add 1mL of water plate bacteriostatic agent into 1L of water and replace it once a week.

Storage/preservation method:

Store in a cool place at normal temperature for 2 years.

matters needing attention:

1. Wear appropriate protective clothing and gloves during operation.

2. In case of contact with skin and eyes, the original solution of bacteriostatic agent in water pan should be washed immediately with a large amount of clean water without delay, and should be immediately treated if necessary.

3. The bacteriostatic agent in water pan is diluted with sterile water.

4. This product is only used for scientific research by professionals, and shall not be used for clinical diagnosis or treatment, food or medicine, and shall not be stored in ordinary houses.

5. For your safety and health, please wear lab clothes and disposable gloves.

comming soon