Bactericide for water bath

This product is a non-antibiotic antibacterial agent, which can remove and inhibit bacteria, fungi, mycoplasma, algae and other microorganisms in the water in the cell room, laboratory and other water baths, keep the water in the bath clean and avoid cross contamination.

usage method:

After washing the water bath, spray alcohol for disinfection, and add ultra-pure water

It is necessary to add this product to the water body of the water bath at a ratio of about 1:500, that is, it can effectively remove and inhibit the growth of bacteria, fungi and other microorganisms, and the inhibition effect lasts for 7-10 days or more. For the polluted water body, it should be used once every 7-10 days, and the pollution can be removed by multiple use.

Storage conditions:

Store in a cool place at room temperature away from light, effective for two years.

matters needing attention:

Because the water bath pan is generally open, even if the growth of microorganisms in the water body is inhibited after treatment with this product, the microorganisms in the environment and dust in the air will also fall into the water bath pan, and generally after treatment with this product, they will gather at the bottom of the water bath pan to form flocculent precipitation.

Even if this product is used for bacteriostasis treatment of the water bath, the water in the water bath needs to be replaced regularly (7-15 days). Before changing the water, pay attention to cleaning the inner wall of the water bath.

Avoid contact with skin and eyes. Once in contact, please wash immediately with plenty of water without delay.

This product is only used for scientific research by professionals, and shall not be used for clinical diagnosis or treatment, food or medicine, and shall not be stored in ordinary houses.

For your safety and health, please wear lab clothes and disposable gloves.

coming soon